The storage devices we used today are typically HDD and SSD to save data files. They’re removable storage devices like USB flash drive. The truth is that regardless of what drive you are using, it’s an invalid file system so that Windows can recognize it and put it to use. USB is one of the easiest ways to transfer data from one computer to another. But sometimes we want to format Format USB Flash Drive. Here in this article, we are going to share how to Format USB Flash Drive in Windows 10 using Command Prompt. By formatting, you can easily resolve any USB flash drive, pen drive and a memory stick that’s write protected, virus infected, corrupted, and damaged. So here is how to format a USB flash drive? This page shows you how to format a USB flash drive using Windows inbuilt Command Prompt, and the following is the in-depth steer you should rigorously follow.
USB Flash Drive will occasionally display less memory than is really available, even after the drive was completely wiped. At these times, it is useful to reformat your USB flash drive to revive your device its whole capacity. Formatting your USB will open up the drive’s storage space and also increase its efficacy.
How To Format USB Flash Drive
This article shows you how to format USB flash drive to FAT32, NTFS file system in Windows 10. Formatting a USB drive can fix the corrupt partition.
Formatting USB Flash Drive is a common operation for all users. Many users rely on formatting to repair any mistakes on storage devices. Might you not know to format? Let’s take a good look at it today.
Formatting a USB flash drive is a very easy job in Windows. From the File Explorer, right-click on the USB drive, click Format, pick a file system for the drive > Format to format the USB drive.
Also Read: Pause Windows Updates in Windows 10
Format USB pen drive via Command Prompt in Windows 10
Step 1: Run Command Prompt as administrator. Press Win + S to open Search and then search for Command Prompt. Right click on it and select Run as Admin.
Step 2: In the Command Prompt, execute the following commands and press Enter.
Diskpart > Enter.
List Disk > Enter.
DiskPart tool will list all the drives connected to PC. Select the USB drive that you want to format and note down its disk number.
Select disk X (X is the number of your disk)
Clean
Create partition primary
Format fs=NTFS Quick
Exit
Hope you liked this article. If you need any help then comment below.