• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

WisAir

  • Home
  • Comparison
  • How to
  • Reviews
  • Lists
  • Softwares

Tenda Router Login: Access Router Admin Page

January 3, 2021 By Soloman Leave a Comment

If you are using a Tenda router at home for the WiFi connection, you should know how to log in to its admin interface. From there, you can make a lot of configurations and customizations. If you want to learn more about the Tenda router login, you are reading the correct post.

Here, I will explain everything you need to know about how to log in to Tenda routers. Additionally, I will also tell you the default username and password for your router and tips to configure it properly.

Contents

  • 1 Tenda Router Login
    • 1.1 Step-1: Connect your Device to the Tenda Router
    • 1.2 Step-2: Access the Default Gateway IP
    • 1.3 Step-3: Log in to the Admin Page using Router Credentials
  • 2 Default Username and Password for Tenda Routers
    • 2.1 What if the Default Router Credentials Don’t Work?
  • 3 Common Tenda Router Configurations
  • 4 Final Words

Tenda Router Login

Tenda is a well-known brand for wireless routers. If you own their routers, then you are using the right device for your WiFi network. I’m a fan of Tenda routers as they are by default configured to provide the best performance. However, you can even optimize and improvise it. For that, you’ll have to log in to the admin panel of your router.

The admin panel is the control center from where you can change or edit any of the router settings. All sorts of router configurations are done here. In this easy guide for Tenda router login, I will explain all the key steps that you have to perform and the different tweaks that you can make to bring the best out of your router.

Step-1: Connect your Device to the Tenda Router

The first thing you have to do is connect the device that you are going to use to access the Tenda admin panel to the Tenda router. You can connect it using both wired or wireless connections. I’d suggest being on a wired (ethernet) connection as it is more stable and secure.

However, you can also follow the procedure while being connected to the WiFi network. Also, you can use any device like your Windows or Mac PC, your Android device, or your iPhone. Just make sure your device is connected to the network.

Step-2: Access the Default Gateway IP

After connecting the device to the router, you have to use the ‘Default Gateway IP.’ Every router has an IP address assigned by the manufacturers that you can use for logging in. Tenda routers generally use IP 192.168.0.1, while some routers also use IP 192.168.1.1.

Note: The 7th and 8th character in the IP address is numeric “1” and not alphabetical “l” (L).

  • Open a web browser. It could be Chrome, Safari, Firefox, or any other.
  • Go to the URL bar and enter 192.168.0.1 in it. Alternatively, click on this link.
  • Next, hit the search icon.
  • Now, wait for the router login page to load.

If the page doesn’t load, check for any typing errors. If the first router IP didn’t work, try using the second one- 192.168.1.1 (here is its link).

Step-3: Log in to the Admin Page using Router Credentials

When the Tenda router login page loads, you have to enter the router username and password in their given fields. Remember that the router username and password are different than your WiFi name and password. If you don’t know your current router credentials, you can use the default ones (listed below).

After entering the router username and password, click on the ‘Login’ button.  That’s it. You are now inside the Tenda router admin panel. You can do your desired operations here.

Default Username and Password for Tenda Routers

Tenda routers have these default credentials as assigned by the manufacturers. The technicians who complete the router setup at home often tend to inform you about it.

Format: Username/Password

  • admin/admin
  • admin/password
  • (blank)/password
  • admin/(blank)
  • (blank)/admin
  • (blank)/(blank)

Try using these when you don’t know what your Tenda router username and password is.

What if the Default Router Credentials Don’t Work?

If the default router credentials didn’t work for you, then someone else might have changed the router username or password without your knowledge. You should enquire your parents or siblings about this. If they also don’t know the credentials, you can reset the router to factory settings. After that, you’ll be able to log in using the default username and password.

To reset your Tenda router, find the ‘reset’ button present at the back, press and hold it using a needle, pin, or paperclip for around 15 seconds. Once the router LED blinks, you can release the button. When the resetting is complete, you’ll have to re-do the setup once again.

Common Tenda Router Configurations

Here are the general Tenda router configurations that you should alter after logging in to the admin panel. These tweaks will ensure that you are getting the best internet speed and range, while also securing your network connection.

Upgrade Tenda router firmware: Router software may contain bugs and issues, that can be easily fixed by upgrading the router firmware. You should enable the ‘Sys Auto Maintenance’ feature through the ‘Administration’ section in the control panel.

Change WiFi Name (SSID) and password: Go to the ‘Wireless’ section in the admin panel, and from there, you can set a new name and password for your WiFi network. Make sure you are using a catchy name and a strong password for your connection.

Set up Parental Controls: You can also turn on the ‘Parental Control’ feature via the admin interface to keep your kids safe while browsing the web. You can also block away specific webpages or websites.

Configure Encryption Settings: Go to the ‘Advanced’ section in the admin panel to configure the encryption settings for your network. Choosing the strongest one is recommended.

Change Channel Frequency: Tend routers allow you to choose between 2.4GHz and 5GHz channels to distribute the WiFi network. You can switch to a 5GHz channel if you are fine with a short-range but want an increased internet speed. But, if you want a longer range, you’ll have to switch to a 2.4Ghz channel.

Final Words

This was the complete Tenda Router login guide. Now you know how to log in to the admin panel of your router on any device to customize the default settings. You can also apply the configurations I have mentioned above to bring the best performance out of your router.

That’s all for this post. I hope you have learned everything now. Feel free to use the comment box for any existing doubts or suggestions about the things mentioned here.

Filed Under: How to

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Recent Posts

  • Slither.io Hack: Cheats, Mods & Bots to Win Easily [2021]
  • Diep.io Hack: Free Upgrades Scripts & MOD APK
  • 17 Best Audible Alternatives You Should Try in 2021
  • Cookie Clicker Hack: Unlimited Cookies & Cheats 2021
  • How to Activate Showtime Anytime?

Categories

  • Comparison
  • Gaming
  • How to
  • Lists
  • Reviews
  • Softwares

Top Collection

Firestick vs Roku

Firestick vs Roku: Which is Best for your TV?

13 Best Titanium TV Alternatives To Watch Movies in 2021

Roblox Banned? Steps to Get Your Account Back

Is G2A Safe and Legal Site to Buy Game Keys?




Copyright ©Wisair.com 2020. All Rights Reserved.

  • About Us
  • Contact Us
  • Career
  • Privacy Policy
  • Disclaimer
  • GDPR Policy